This Porsche 911 came in through a referral from a former Arlington Porsche sales representative. The owner wanted full protection applied from day one.
Vehicle: Porsche 911
Service Type : Ceramic Coating on the full interior and exterior, radiator screen installation, clear side marker light upgrade, and frunk hood protector fitting.
Primary Product : XPEL Fusion Plus Ceramic Coating
Service Location : Sterling, VA 20166
Installer : RJ and the Speed & Tech Motoring crew
When you buy a new Porsche 911, you want the right shop, not just any shop. This owner was referred directly by a former Arlington Porsche sales representative who knew exactly which installers in Northern Virginia could be trusted with a car at this level. That referral brought him straight to Speed & Tech Motoring in Sterling, VA.
The goal was clear from day one. Full ceramic protection on every surface, inside and out, using XPEL Fusion Plus. On the exterior it creates a hydrophobic barrier against UV rays, road contaminants, and daily wear. On the interior it seals leather and trim against spills, fading, and long-term surface degradation. Both applications together protect the 911’s value and appearance from the moment it leaves the shop.
Radiator screens, clear side marker lights, and a frunk hood protector completed the build. Each upgrade targets a specific vulnerability on the 911 platform, keeping the car protected, functional, and visually sharp without changing what makes it a Porsche.
The full exterior of the Porsche 911 received ceramic coating. This professional-grade product bonds to the clear coat at a molecular level, creating a semi-permanent protective layer with genuine hardness and hydrophobic performance.
The coating was applied after a thorough surface decontamination and paint inspection. On a new vehicle, this step confirms there are no transport scratches, dealer wash marks, or contamination that would be sealed under the coating.
Interior ceramic coating is less commonly discussed but equally important for a vehicle like the 911. Fusion Plus was applied to interior surfaces to protect against UV-related fading, spills, and the daily wear that affects leather, trim, and dashboard surfaces over time.
Radiator screens are a practical and widely recommended upgrade for the Porsche 911 platform. The front air intakes on the 911 are open to road debris, insects, and small stones that can reach the radiator core and cause damage over time. Screens provide a physical barrier without restricting airflow.
This installation was handled cleanly, fitting precisely within the factory intake openings. The result is added protection for one of the most expensive components on the car, with no visual compromise to the 911’s front-end design.
The factory yellow side marker lights on this 911 were replaced with clear units. This is a popular and clean cosmetic upgrade. Clear markers remove the amber tint from the side profile and give the car a sharper, more European-spec appearance.
The swap was done precisely, with proper alignment and secure fitment. No wiring was modified. The result is a subtle but immediately noticeable visual improvement that most 911 enthusiasts appreciate.
The front trunk (frunk) area on a Porsche is a common contact point for paint chips and surface scuffs during normal use. Loading items in and out of the frunk gradually damages the painted leading edge of the hood opening.
A fitted frunk hood protector was installed to cover and shield this high-contact area. The protector sits flush with the bodywork and is nearly invisible in normal use, but it prevents the kind of cosmetic wear that builds up over years of ownership.
Every project at Speed & Tech Motoring starts with a full walkaround. For a new Porsche 911, this means checking every panel under proper lighting for transport damage, dealer prep marks, or surface contamination that needs addressing before any coating or install work begins.
We confirmed the paint was in clean condition and mapped out the sequence of services: coating first, then accessory installs, then final quality check. The client’s goals were clear and the plan was set before any work started.
Even a new vehicle needs full surface preparation before ceramic coating. We performed a two-stage hand wash followed by an iron fallout treatment to remove bonded metallic particles from the paint surface. A clay bar decontamination pass followed to ensure the clear coat was completely smooth and chemically clean.
Trim, rubber seals, and glass edges were masked before coating application began. Proper masking prevents ceramic products from bonding to surfaces where it should not be.
With the surface fully prepared, we applied XPEL Fusion Plus ceramic coating panel by panel. The coating was spread in thin, even layers and leveled before flash time. Each section was worked carefully to avoid high spots or missed areas.
Flash time and ambient temperature were monitored throughout the application. After leveling, the coating was allowed to cure under controlled conditions before the vehicle was moved. Proper curing is what separates a professional ceramic coating job from a rushed one.
Interior surfaces were cleaned and prepared separately before XPEL Fusion Plus was applied to leather, trim, and applicable dashboard areas. Interior application requires a different technique than exterior work. Surfaces are more varied in texture and porosity, so each material type was treated with the correct amount of product and appropriate working time.
With coating work completed and the vehicle in curing phase, our team handled the three accessory installs. Radiator screens were fitted into the front intake openings. The yellow factory side marker lights were removed and clear replacements were seated and secured. The frunk hood protector was fitted and aligned with the body line.
Each accessory was checked for alignment, secure fitment, and clean appearance before the car moved to final inspection.
The completed 911 was inspected under LED lighting for coating consistency, gloss uniformity, and accessory fit. Every panel was checked. Every edge was confirmed. The client was walked through the finished vehicle and given aftercare instructions for maintaining the ceramic coating.
The car was delivered on time, exactly as promised.
When this Porsche 911 left Speed & Tech Motoring, it was protected from the inside out. The ceramic coating gives the exterior a deep gloss with a hydrophobic surface that will hold up through Northern Virginia seasons, from summer UV exposure along the Dulles Corridor to autumn road grime and winter salt. The interior coating sealed leather and trim surfaces against the kind of gradual wear that quietly degrades a cabin over years.
The radiator screens added real protection to a vulnerable component. The clear marker lights gave the 911 a cleaner, sharper side profile. The frunk hood protector eliminated one of the most common cosmetic wear points on the platform.
Every service was done on time. Every detail was handled with care. The client left with exactly what the referral promised: a shop that takes good care of you and your Porsche.
“FIVE STARS!!! 5 Stars for the work and 5 Stars for the customer service. RJ and the crew at Speed & Tech Motoring were referred to me by a former Arlington Porsche sales rep who promised they’d take good care of me and my new 911. And that they did. I had S&T apply XPEL ceramic interior and exterior coating, install radiator screens, swap out ugly yellow side marker lights with clear ones, and install a frunk hood protector. The drop off was easy; the work was done on time; and it looks great. I’d use them again in a heartbeat.”
Read this review on Google https://maps.app.goo.gl/UyJLESxVHp3yPgFc9
This is the kind of feedback that reflects what Speed & Tech Motoring is built on. A straightforward drop-off, honest communication, work delivered on schedule, and results the owner is proud of. When a Porsche sales professional trusts us with a client’s new 911, we take that responsibility seriously. This project shows exactly what that looks like in practice.
We are XPEL certified, which means your Porsche gets the correct product applied the right way, with manufacturer-backed warranty coverage on every job.
This client was referred directly by a former Arlington Porsche sales representative. That kind of referral does not happen by accident. It is built through consistent, quality work on vehicles that demand the best.
Every ceramic coating service uses a professional-grade product engineered for long-term gloss, hydrophobic protection, and UV resistance. No shortcuts, no consumer-grade substitutes.
The drop-off was smooth. Work was completed on schedule. The car left looking exactly as promised. That is the standard we hold on every project, regardless of the vehicle or service.
You own a Porsche 911, Cayenne, Macan, or any other model and want it protected with ceramic coating, paint protection film, or window tinting in Sterling, VA, Speed & Tech Motoring is ready to help.
